X5000> boot
FM1@DTSEC4 Waiting for PHY auto negotiation to complete......... TIMEOUT !
FM1@DTSEC4: No link.
Using FM1@DTSEC5 device
TFTP from server 10.30.10.252; our IP address is 10.30.10.21
Filename 'kernel.uImage'.
Load address: 0x3ffffc0
Loading: #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 ##########
	 5.3 MiB/s
done
Bytes transferred = 13492328 (cde068 hex)
Using FM1@DTSEC5 device
TFTP from server 10.30.10.252; our IP address is 10.30.10.21
Filename 'cyrus_p5020.dtb'.
Load address: 0x1c000000
Loading: ####
	 5.2 MiB/s
done
Bytes transferred = 49152 (c000 hex)
WARNING: adjusting available memory to 30000000
## Booting kernel from Legacy Image at 03ffffc0 ...
   Image Name:   FreeBSD
   Created:      2019-02-28  22:32:47 UTC
   Image Type:   PowerPC Linux Kernel Image (uncompressed)
   Data Size:    13492264 Bytes = 12.9 MiB
   Load Address: 03ffffc0
   Entry Point:  04001000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 1c000000
   Booting using the fdt blob at 0x1c000000
   XIP Kernel Image ... OK
   reserving fdt memory region: addr=7ffff000 size=1000
   reserving fdt memory region: addr=fffff000 size=1000
   reserving fdt memory region: addr=7ff35000 size=1000
   Loading Device Tree to 03fe0000, end 03ffefff ... OK
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
---<<BOOT>>---
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #0 r344612M: Thu Feb 28 16:26:11 CST 2019
    root@talos.east.rtk0.net:/usr/obj/usr/src/powerpc.powerpc64/sys/QORIQ64 powerpc
gcc version 8.2.0 (GNU Collection for FreeBSD) 
WARNING: WITNESS option enabled, expect reduced performance.
cpu0: Freescale e5500 core revision 1.2, 1995.00 MHz
cpu0: Features cc009100<PPC32,PPC64,FPU,MMU,BOOKE,ARCH205,ARCH206>
cpu0: Features2 8000000<ISEL>
cpu0: HID0 c0000000<EMCP,EN_L2MMU_MHD>
real memory  = 8505954304 (8111 MB)
avail memory = 8262246400 (7879 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
arc4random: no preloaded entropy cache
random: entropy device external interface
ofwbus0: <Open Firmware Device Tree> on nexus0
simplebus0: <Flattened device tree simple bus> on ofwbus0
bman-portals0: <Freescale Buffer Manager - Portals> on ofwbus0
qman-portals0: <Freescale Queue Manager - Portals> on ofwbus0
simplebus1: <Flattened device tree simple bus> mem 0xffe000000-0xffe000fff on ofwbus0
fman0: <Freescale Frame Manager> mem 0x400000-0x4fffff irq 96,16 on simplebus1
> INFO (__ERR_MODULE__) [CPU00, /usr/src/sys/contrib/ncsw/Peripherals/FM/fm_ncsw.c:470 LoadFmanCtrlCode]: FMan-Controller code (ver 101.0.8) loaded to IRAM.
fman0: Hardware version: 3.0.
rcpm0 mem 0xe2000-0xe2fff on simplebus1
lbc0: <Freescale Local Bus Controller> mem 0xffe124000-0xffe124fff irq 25 on ofwbus0
gpio0: <Freescale QorIQ GPIO driver> mem 0x130000-0x130fff irq 55 on simplebus1
gpiobus0: <GPIO bus> on gpio0
openpic0: <OpenPIC Interrupt Controller> mem 0x40000-0x7ffff on simplebus1
qman0: <Freescale Queue Manager> mem 0x318000-0x318fff irq 16 on simplebus1
qman0: Hardware version: 1.2.
bman0: <Freescale Buffer Manager> mem 0x31a000-0x31afff irq 16 on simplebus1
bman0: Hardware version: 1.0.
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpu1: <Open Firmware CPU> on cpulist0
spi0: <Freescale eSPI controller> mem 0x110000-0x110fff irq 53 on simplebus1
spibus0: <OFW SPI bus> on spi0
iichb0: <I2C bus controller> mem 0x118100-0x1181ff irq 38 on simplebus1
iicbus0: <OFW I2C bus> on iichb0
iic0: <I2C generic I/O> on iicbus0
iichb1: <I2C bus controller> mem 0x119100-0x1191ff irq 39 on simplebus1
iicbus1: <OFW I2C bus> on iichb1
iic1: <I2C generic I/O> on iicbus1
ds13070: <Microchip MCP7941x RTC> at addr 0xde on iicbus1
pq_mdio0: <Freescale QorIQ MDIO> mem 0xe1120-0xe1fff irq 100 on fman0
dtsec0: <Freescale Data Path Triple Speed Ethernet Controller> mem 0xe6000-0xe6fff on fman0
dtsec0: Configured for regular mode.
miibus0: <MII bus> on dtsec0
micphy0: <Micrel KSZ9021 10/100/1000 PHY> PHY 3 on miibus0
micphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
dtsec0: Ethernet address: 00:04:a3:6b:44:93
dtsec1: <Freescale Data Path Triple Speed Ethernet Controller> mem 0xe8000-0xe8fff on fman0
dtsec1: Configured for regular mode.
miibus1: <MII bus> on dtsec1
micphy1: <Micrel KSZ9021 10/100/1000 PHY> PHY 7 on miibus1
micphy1:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
dtsec1: Ethernet address: 00:1e:c0:f7:d0:82
dtsec2: <Freescale Data Path Triple Speed Ethernet Controller> mem 0xe0000-0xe0fff on fman0
dtsec2: Could not load local-mac-addr property from DTS
device_attach: dtsec2 attach returned 6
dtsec2: <Freescale Data Path Triple Speed Ethernet Controller> mem 0xe2000-0xe2fff on fman0
dtsec2: Could not load local-mac-addr property from DTS
device_attach: dtsec2 attach returned 6
pq_mdio1: <Freescale QorIQ MDIO> mem 0xe3120-0xe3fff on fman0
dtsec2: <Freescale Data Path Triple Speed Ethernet Controller> mem 0xe4000-0xe4fff on fman0
dtsec2: Could not load local-mac-addr property from DTS
device_attach: dtsec2 attach returned 6
pq_mdio2: <Freescale QorIQ MDIO> mem 0xe5120-0xe5fff on fman0
pq_mdio3: <Freescale QorIQ MDIO> mem 0xe7120-0xe7fff on fman0
pq_mdio4: <Freescale QorIQ MDIO> mem 0xe9120-0xe9fff on fman0
dtsec2: <Freescale Data Path Triple Speed Ethernet Controller> mem 0xf0000-0xf0fff on fman0
dtsec2: Could not load local-mac-addr property from DTS
device_attach: dtsec2 attach returned 6
sdhci_fsl0: <Freescale eSDHC controller> mem 0x114000-0x114fff irq 48 on simplebus1
mmc0: <MMC/SD bus> on sdhci_fsl0
iichb2: <I2C bus controller> mem 0x118000-0x1180ff irq 38 on simplebus1
iicbus2: <OFW I2C bus> on iichb2
iic2: <I2C generic I/O> on iicbus2
iichb3: <I2C bus controller> mem 0x119000-0x1190ff irq 39 on simplebus1
iicbus3: <OFW I2C bus> on iichb3
iic3: <I2C generic I/O> on iicbus3
uart0: <16550 or compatible> mem 0x11c500-0x11c5ff irq 36 on simplebus1
uart0: console (115451,n,8,1)
uart1: <16550 or compatible> mem 0x11c600-0x11c6ff irq 36 on simplebus1
uart2: <16550 or compatible> mem 0x11d500-0x11d5ff irq 37 on simplebus1
uart3: <16550 or compatible> mem 0x11d600-0x11d6ff irq 37 on simplebus1
gpioc0: <GPIO controller> on gpio0
ehci0: <Freescale integrated EHCI controller> mem 0x210000-0x210fff irq 44 on simplebus1
usbus0: EHCI version 1.0
usbus0 on ehci0
ehci1: <Freescale integrated EHCI controller> mem 0x211000-0x211fff irq 45 on simplebus1
usbus1: EHCI version 1.0
usbus1 on ehci1
fslsata0: <Freescale Integrated SATA Controller> mem 0x220000-0x220fff irq 68 on simplebus1
fslsata1: <Freescale Integrated SATA Controller> mem 0x221000-0x221fff irq 69 on simplebus1
pcib0: <Freescale Integrated PCI/PCI-E Controller> mem 0xffe200000-0xffe200fff irq 16 on ofwbus0
pci0: <OFW PCI bus> on pcib0
pcib1 irq 16 at device 0.0 on pci0
pci1: <OFW PCI bus> on pcib1
vgapci0: <VGA-compatible display> at device 0.0 on pci1
pci1: <multimedia, HDA> at device 0.1 (no driver attached)
pcib2: <Freescale Integrated PCI/PCI-E Controller> mem 0xffe201000-0xffe201fff irq 16 on ofwbus0
pci2: <OFW PCI bus> on pcib2
pcib3 irq 16 at device 0.0 on pci2
pci3: <OFW PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 0.0 on pci3
pci4: <PCI bus> on pcib4
pcib5: <PCI-PCI bridge> at device 1.0 on pci4
pcib6: <PCI-PCI bridge> at device 2.0 on pci4
pcib7: <PCI-PCI bridge> at device 3.0 on pci4
pcib8: <PCI-PCI bridge> at device 8.0 on pci4
pcib9: <PCI-PCI bridge> at device 16.0 on pci4
gpiopower0: <GPIO poweroff control> on ofwbus0
gpiopower1: <GPIO restart control> on ofwbus0
cryptosoft0: <software crypto> on nexus0
Timecounter "timebase" frequency 25000000 Hz quality 0
Event timer "decrementer" frequency 25000000 Hz quality 1000
Timecounters tick every 1.000 msec
ds13070: registered as a time-of-day clock, resolution 1.000000s
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <Freescale EHCI root HUB> at usbus0
uhub0: <Freescale EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Freescale EHCI root HUB> at usbus1
uhub1: <Freescale EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
pass0 at fslsata1 bus 0 scbus1 target 0 lun 0
pass0: <PLEXTOR DVDR   PX-L890SA 1.07> Removable CD-ROM SCSI device
pass0: Serial Number 3524332 328203500657
pass0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
mmcsd0: 4GB <SDHC USD   0.2 SN 4A9B3147 MFG 05/2015 by 116 J`> at mmc0 49.8MHz/4bit/65535-block
Sending DHCP Discover packet from interface dtsec0 (00:04:a3:6b:44:93)
Sending DHCP Discover packet from interface dtsec1 (00:1e:c0:f7:d0:82)
uhub0: 1 port with 1 removable, self powered
uhub1: 1 port with 1 removable, self powered
dtsec0: link state changed to DOWN
dtsec1: link state changed to UP
ugen0.2: <vendor 0x0424 product 0x2514> at usbus0
uhub2 on uhub0
uhub2: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/b.b3, addr 2> on usbus0
uhub2: MTT enabled
ugen1.2: <vendor 0x0424 product 0x2514> at usbus1
uhub3 on uhub1
uhub3: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/b.b3, addr 2> on usbus1
uhub3: MTT enabled
uhub2: 4 ports with 4 removable, self powered
uhub3: 4 ports with 4 removable, self powered
Received DHCP Offer packet on dtsec1 from 10.30.10.252 (accepted)
Sending DHCP Request packet from interface dtsec1 (00:1e:c0:f7:d0:82)
Received DHCP Ack packet on dtsec1 from 10.30.10.252 (accepted) (got root path)
DHCP timeout for interface dtsec0
dtsec1 at 10.30.10.97 server 10.30.10.252
subnet mask 255.255.255.0 router 10.30.10.254 root_server 10.30.10.252 rootfs / 
Shutdown interface dtsec0
Adjusted interface dtsec1
RPC timeout for server 10.30.10.252
RPC timeout for server 10.30.10.252
RPC timeout for server 10.30.10.252
RPC timeout for server 10.30.10.252
RPC timeout for server 10.30.10.252
RPC timeout for server 10.30.10.252
RPC timeout for server 10.30.10.252
RPC timeout for server 10.30.10.252
RPC timeout for server 10.30.10.252
RPC timeout for server 10.30.10.252
RPC timeout for server 10.30.10.252