---<<BOOT>>---
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #0 4d7b2a1cd-c1(HEAD): Mon Dec  2 18:41:09 -02 2019
    jenkins@FreeBSD_x86:/usr/local/jenkins/workspace/FreeBSD-head-powerpc-ELFv2-build/obj/usr/local/jenkins/workspace/FreeBSD-head-powerpc-ELFv2-build/src/powerpc.powerpc/sys/GENERIC powerpc
FreeBSD clang version 9.0.0 (tags/RELEASE_900/final 372316) (based on LLVM 9.0.0)
WARNING: WITNESS option enabled, expect reduced performance.
VT(ofwfb): resolution 1440x900
cpu0: Motorola PowerPC 7457 revision 1.1, 815.92 MHz
cpu0: Features 9c000000<PPC32,ALTIVEC,FPU,MMU>
cpu0: HID0 8450c0bc<EMCP,TBEN,NAP,DPM,ICE,DCE,SGE,BTIC,LRSTK,FOLD,BHT>
real memory  = 2115543040 (2017 MB)
avail memory = 2053677056 (1958 MB)
arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
random: entropy device external interface
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0.
kbd0 at kbdmux0
WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0.
ofwbus0: <Open Firmware Device Tree> on nexus0
unin0: <Apple UniNorth System Controller> mem 0xf8000000-0xf8ffffff on ofwbus0
unin0: Version 210
pcib0: <Apple UniNorth Host-PCI bridge> mem 0xf0000000-0xf1ffffff irq 45 on ofwbus0
pci0: <OFW PCI bus> on pcib0
pcib1: <Apple UniNorth Host-PCI bridge> mem 0xf2000000-0xf3ffffff irq 45 on ofwbus0
pci1: <OFW PCI bus> on pcib1
macio0: <Intrepid I/O Controller> mem 0x80000000-0x8007ffff at device 23.0 on pci1
macgpio0: <MacIO GPIO Controller> mem 0x50-0x7f on macio0
pcib2: <Apple UniNorth Host-PCI bridge> mem 0xf4000000-0xf5ffffff irq 45 on ofwbus0
pci2: <OFW PCI bus> on pcib2
pmuextint0: <Apple PMU99 External Interrupt> extint-gpio 1 irq 47 on macgpio0
pmu0: <Apple PMU99 Controller> mem 0x16000-0x17fff irq 25 on macio0
pmu0: registered as a time-of-day clock, resolution 0.001000s
openpic0: <OpenPIC Interrupt Controller> mem 0x40000-0x7ffff on macio0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
lock order reversal:
 1st 0x1818640 16384 (UMA zone) @ /usr/local/jenkins/workspace/FreeBSD-head-powerpc-ELFv2-build/src/sys/vm/uma_core.c:3589
 2nd 0x1101608 kernelpmap (kernelpmap) @ /usr/local/jenkins/workspace/FreeBSD-head-powerpc-ELFv2-build/src/sys/powerpc/aim/mmu_oea.c:1524
stack backtrace:
#0 0x5c511c at witness_debugger+0x94
#1 0x5c4e0c at witness_checkorder+0xb78
#2 0x512a7c at __mtx_lock_flags+0xcc
#3 0x8f2008 at moea_kextract+0x5c
#4 0x92e8bc at pmap_kextract+0x80
#5 0x898778 at zone_release+0x118
#6 0x891900 at zone_free_item+0x84
#7 0x893e40 at uma_zfree_domain+0x50
#8 0x50b3c8 at free_domain+0xb0
#9 0x581450 at device_set_driver+0x74
#10 0x58120c at device_probe_child+0x2b8
#11 0x58250c at device_probe+0xec
#12 0x582600 at device_probe_and_attach+0x54
#13 0x5852e8 at bus_generic_new_pass+0x13c
#14 0x5852c8 at bus_generic_new_pass+0x11c
#15 0x5852c8 at bus_generic_new_pass+0x11c
#16 0x57f3c4 at bus_set_pass+0x68
#17 0x5880d4 at root_bus_configure+0x30
powermac_nvram0: <Apple NVRAM> mem 0xfff04000-0xfff07fff on ofwbus0
powermac_nvram0: bank0 generation 508, bank1 generation 509
WARNING: Device "powermac_nvram" is Giant locked and may be deleted before FreeBSD 13.0.
iichb0: <Keywest I2C controller> mem 0xf8001000-0xf8001fff irq 42 on unin0
iicbus0: <OFW I2C bus> on iichb0
adt746x0: <Apple Thermostat Unit ADT746X> at addr 0x15c on iicbus0
iicbus0: <unknown card> at addr 0x1d2
iicbus0: <unknown card> at addr 0x84
iicbus0: <unknown card> at addr 0x1c0
agp0: <Apple UniNorth 2 AGP Bridge> on hostb0
WARNING: Device "agp" is Giant locked and may be deleted before FreeBSD 13.0.
vgapci0: <VGA-compatible display> port 0x400-0x4ff mem 0xb8000000-0xbfffffff,0xb0000000-0xb000ffff irq 48 at device 16.0 on pci0
backlight0: <PowerBook backlight for ATI graphics> on vgapci0
vgapci0: Boot video device
scc0: <Zilog Z8530 dual channel SCC> mem 0x13000-0x13fff,0x8400-0x84ff,0x8500-0x85ff,0x8600-0x86ff,0x8700-0x87ff irq 22,5,6,23,7,8 on macio0
uart0: <z8530, channel A> on scc0
uart1: <z8530, channel B> on scc0
pcm0: <Apple I2S Audio Controller> mem 0x10000-0x10fff,0x8000-0x80ff,0x8100-0x81ff irq 30,1,2 on macio0
adb0: <Apple Desktop Bus> on pmu0
iichb1: <Keywest I2C controller> mem 0x18000-0x18fff irq 26 on macio0
iicbus1: <OFW I2C bus> on iichb1
iicbus1: <unknown card> at addr 0x1c0
snapper0: <Texas Instruments TAS3004 Audio Codec> at addr 0x6a on iicbus1
ata0: <Apple MacIO ATA Controller> mem 0x20000-0x20fff,0x8800-0x88ff irq 24,12 on macio0
pci1: <network> at device 18.0 (no driver attached)
pci1: <bridge, PCI-CardBus> at device 19.0 (no driver attached)
ohci0: <Apple KeyLargo/Intrepid USB controller> mem 0xa0003000-0xa0003fff irq 29 at device 26.0 on pci1
usbus0 on ohci0
ohci1: <NEC uPD 9210 USB controller> mem 0xa0002000-0xa0002fff irq 63 at device 27.0 on pci1
usbus1 on ohci1
ohci2: <NEC uPD 9210 USB controller> mem 0xa0001000-0xa0001fff irq 63 at device 27.1 on pci1
usbus2 on ohci2
ehci0: <NEC uPD 72010x USB 2.0 controller> mem 0xa0000000-0xa00000ff irq 63 at device 27.2 on pci1
usbus3: EHCI version 1.0
usbus3 on ehci0
ohci3: <Apple KeyLargo/Intrepid USB controller> at device 24.0 on pci1
usbus4 on ohci3
ohci4: <Apple KeyLargo/Intrepid USB controller> at device 25.0 on pci1
usbus5 on ohci4
ata1: <Intrepid Kauai ATA Controller> mem 0xf5004000-0xf5007fff irq 39 at device 13.0 on pci2
fwohci0: <Apple UniNorth 2> mem 0xf5000000-0xf5000fff irq 40 at device 14.0 on pci2
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:0a:95:ff:fe:c4:b6:b6
fwohci0: invalid speed 7 (fixed to 3).
fwohci0: Phy 1394a available S800, 3 ports.
fwohci0: Link S800, max_rec 4096 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:0a:95:c4:b6:b6
fwe0: Ethernet address: 02:0a:95:c4:b6:b6
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: PhysicalUpperBound register is not implemented.  Physical memory access is limited to the first 4GB
fwohci0: PhysicalUpperBound = 0x00000000
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=2, CYCLEMASTER mode
gem0: <Apple UniNorth2 GMAC Ethernet> mem 0xf5200000-0xf53fffff irq 41 at device 15.0 on pci2
miibus0: <MII bus> on gem0
e1000phy0: <Marvell 88E1111 Gigabit PHY> PHY 0 on miibus0
e1000phy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
gem0: 10kB RX FIFO, 4kB TX FIFO
gem0: Ethernet address: 00:0a:95:c4:b6:b6
cryptosoft0: <software crypto> on nexus0
Timecounter "timebase" frequency 18432000 Hz quality 0
Event timer "decrementer" frequency 18432000 Hz quality 1000
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0)  (me) 
firewire0: bus manager 0 
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
ugen0.1: <Apple OHCI root HUB> at usbus0
uhub0 on usbus0
uhub0: <Apple OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <NEC OHCI root HUB> at usbus1
uhub1 on usbus1
uhub1: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ugen2.1: <NEC OHCI root HUB> at usbus2
uhub2 on usbus2
uhub2: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub0: 2 ports with 2 removable, self powered
ugen3.1: <NEC EHCI root HUB> at usbus3
uhub3 on usbus3
uhub3: <NEC EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
ugen4.1: <Apple OHCI root HUB> at usbus4
uhub4 on usbus4
uhub4: <Apple OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
uhub1: 3 ports with 3 removable, self powered
uhub2: 2 ports with 2 removable, self powered
ugen5.1: <Apple OHCI root HUB> at usbus5
uhub5 on usbus5
uhub5: <Apple OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
adt746x0: Dev ID 0x27, Company ID 0x41, Rev ID 0x62 CNF: 0x5
adt746x0: 2 fans detected!
adt746x0: 0 sensors detected!
adt746x0: WARNING: No sensors detected!
ugen0.2: <vendor 0x05ac product 0x8203> at usbus0
akbd0: <PowerBook G3 Keyboard> at device 2 on adb0
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
kbd1 at akbd0
ams0: <ADB Mouse> at device 3 on adb0
ams0: ADB Mouse = 0xd (Extended Mode)
ams0: 4-button 400-dpi Touchpad
abtn0: <ADB Brightness/Volume/Eject Buttons> at device 7 on adb0
WARNING: WITNESS option enabled, expect reduced performance.
uhub3: 5 ports with 5 removable, self powered
Trying to mount root from cd9660:/dev/iso9660/13_0_CURRENT_POWERPC_CD [ro]...
Root mount waiting for: CAM
cd0 at ata0 bus 0 scbus0 target 0 lun 0
cd0: <MATSHITA DVD-R   UJ-816 DXJ3> Removable CD-ROM SCSI device
cd0: 16.700MB/s transfers (WDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: 627MB (321168 2048 byte sectors)
ada0 at ata1 bus 0 scbus1 target 0 lun 0
ada0: <TOSHIBA MK1032GAX AB211A> ATA-6 device
ada0: Serial Number 55S35906T
ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
ada0: 95205MB (194980905 512 byte sectors)
mountroot: waiting for device /dev/iso9660/13_0_CURRENT_POWERPC_CD...
random: unblocking device.
lo0: link state changed to UP
gem0: link state changed to DOWN
gem0: link state changed to UP