[bdragon@amaterasu freebsd-e500]$ ./qemu-tabor.sh 


U-Boot 2020.01-00620-g2d2f91a480 (Jan 18 2020 - 19:30:58 -0600)

CPU:   8544, Version: 1.1, (0x80340111)
Core:  e500, Version: 2.2, (0x80210022)
Clock Configuration:
       CPU0:400  MHz, 
       CCB:400  MHz,
       DDR:200  MHz (400 MT/s data rate), LBC: unknown (LCRR[CLKDIV] = 0x00)
L1:    D-cache 32 KiB enabled
       I-cache 32 KiB enabled
DRAM:  2 GiB
L2:    disabled

PCI: base address e0008000
  00:11.0     - 1af4:1004 - Mass storage controller
  00:12.0     - 8086:100e - Network controller
PCI1: Bus 00 - 00

In:    serial
Out:   serial
Err:   serial
Net:   e1000: 42:47:42:00:02:ca
       e1000#0
Hit any key to stop autoboot:  0 
=> dhcp
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
DHCP client bound to address 10.30.10.202 (969 ms)
Using e1000#0 device
TFTP from server 10.30.10.252; our IP address is 10.30.10.202
Filename 'ubldr'.
WARNING: adjusting available memory to 30000000
Load address: 0x2000000
Loading: ########################################################
	 5.4 MiB/s
done
Bytes transferred = 821885 (c8a7d hex)
=> bootelf
## Starting application at 0x00010080 ...
Consoles: U-Boot console  
Compatible U-Boot API signature found @0x7fb6e0a8

FreeBSD/powerpcspe U-Boot loader, Revision 1.1
(Sun Nov 24 18:07:44 CST 2019 root@talos.east.rtk0.net)

DRAM: 2048MB
Number of U-Boot devices: 1
U-Boot env: loaderdev not set, will probe all devices.
Found U-Boot device: net
Booting from net0:
/
can't load 'kernel'

Type '?' for a list of commands, 'help' for more detailed help.
loader>